Views:3 Author:Site Editor Publish Time: 2020-09-16 Origin:Site
Industrial-grade hydroxypropyl methyl cellulose used in mortar is distinguished by viscosity. Generally, the following types are commonly used
Low viscosity: 400 is mainly used for self-leveling mortar. Reason: low viscosity, good leveling, high mortar density.
Medium and low viscosity: 20000-40000 Medium viscosity: 75000-100000
High viscosity: 150000-200000 mainly used for mortar Reason: high viscosity, the mortar is not easy to fall off, sag, and improve workalibity.
1. What is the main application of hydroxypropyl methylcellulose (HPMC) ?
——Answer: HPMC is widely used in construction materials, coatings, synthetic resins, ceramics, medicine, food, textiles, agriculture, cosmetics, tobacco and other industries. At present, most HPMC is construction grade. In construction grade, putty powder is used in a large amount, about 90% is used for putty powder, and the rest is used for cement mortar and glue.
2. What are the types of HPMC, and what are the differences?
——Answer: HPMC can be divided into instant type and hot-melt type. The instant type products are quickly dispersed in cold water and disappear in the water. At this time, the liquid has no viscosity, because HPMC is only dispersed in water without real dissolution. About 2 minutes, the viscosity of the liquid gradually increased, forming a transparent viscous colloid. Hot-melt products, when they come together in cold water, they can quickly disperse in hot water and disappear in hot water. When the temperature drops to a certain temperature, the viscosity slowly appears until a transparent viscous colloid is formed. Hot-melt type can only be used in putty powder and mortar. In liquid glue and paint, clumping occurs and cannot be used. The instant type has a wider range of applications. It can be used in putty powder and mortar, as well as in liquid glue and paint. There is no contraindication.
(To be continued)
Introduction of Landcel HPMCThe alias of Hydroxypropyl methyl cellulose is hypromellose; cellulose hydroxypropyl methyl ether, English abbreviation: HPMC, It uses cotton cellulose as raw material, and is produced by special etherification under alkaline conditions , the whole process is completed un
Tile adhesives are cement and/or polymer dispersion-based systems. The rheological additives used for these are mainly cellulose ethers, which provide the right consistency for the application, sag resistance of wall tiles, water retention for the optimum hardening of cement, and the control of open